Hybrid car technology

The technology powering a new generation of environmentally friendly cars is advancing at an ever increasing rate.

Hybrid vehicles attempt to strike a balance between the more versatile combustion engine and the more economical electric motor. A number of different options exist, and this article attempts to simplify the technology and highlight the differences between modern hybrid systems.

Article links:

Hybrid technology comparison table Electrically assisted hybrids Fully integrated Engine / motor axle split hybrids High-performance hybrid cars Extended range electric vehicles Regenerative braking

Hybrid technology comparison

Hybrid type
Integrated electric motor Engine / motor axle split Extended range electric vehicle

Also known as
  • Parallel hybrid
  • Parallel hybrid
  • Series hybrid
  • EREV
  • Most conventional car-like option
  • Compact
  • Allows larger engine / motor variants to be used
  • Allows usage in high performance cars
  • All the efficiency benefits of electric propulsion without a compromised range
  • Quiet at all speeds and engine loads
  • More expensive than an efficient petrol or diesel option
  • Reduced usable space
  • Complex synchronisation is required between motor and engine
  • Reduced usable space
  • Reduced top speed versus combustion powered equivalents
  • Plug-in / stand-alone
  • Petrol / Diesel
  • Start-stop
  • Single motor
  • Dual motors
  • In-wheel motors
  • Plug-in / stand-alone
  • Petrol / Diesel
  • Start-stop
  • Single motor
  • Dual / quad motors
  • In-wheel motors
  • Plug-in / stand-alone
  • Petrol / Diesel
  • Start-stop
  • Toyota Prius
  • Honda Insight
  • Porsche GT3 Hybrid
  • Honda NSX
  • Infiniti Emerge
  • Peugeot 3008
  • Chevy Volt
  • Vauxhall Ampera

Electrically assisted hybrid cars

[Sometimes known as parallel hybrid cars]

If a car contains both a combustion engine and electric motor, it is unlikely that the electric power will be used as their dominant source of propulsion for high speed cruising. To gain maximum efficiency benefits, the challenge for designers is to ensure that the electric motor can contribute when the greatest benefits can be realised.

Fully integrated

Fully integrated hybrids combine conventional engine and electric motor outputs into a single source. The electric element of the powertrain assists the engine when required but is not essential for progress to be made. The motor usually kicks in when pulling away or when an extra burst of acceleration is required. A 'start-stop' feature is usually employed on the main engine, and this allows maximum efficiency when driving in city conditions. Early hybrids were exclusively petrol due to the relatively quick and easy engine start associated with this fuel, but diesel hybrids are likely to become more common in future as this issue is tackled. Power is provided by a bank of batteries, which is recharged by making use of excess powertrain energy (such as when slowing down, coasting or braking).

See regenerative braking

Diagram 1: Integrated hybrid (front wheel drive)
Integrated hybrid

A. Petrol or diesel engine
B. Integrated electric motor
C. Differential
D. Battery bank

Integrated hybrid technology is often used for the more affordable end of the market due to the relative simplicity and user friendliness of these systems. Pioneers of the technology include Toyota and Honda.

Examples of integrated hybrid cars:

Honda Hybrids [e.g. Insight, CR-Z]
Honda Integrated Motor Assist
Honda Integrated Motor Assist
Honda Insight
Honda Insight
Toyota Hybrids [e.g. Prius, Auris]
Toyota Hybrid Synergy Drive
Toyota Hybrid Synergy Drive
Toyota Prius
Toyota Prius

Engine / motor split by axle

The second natural method of creating a hybrid powertrain is to split the electric motor and the engine by axle. Hybrids with a dedicated electric axle have a number of potential layouts:

  • A single motor and differential to split the drive to both wheels
  • Dual inboard motors, with computer controlled variable speed control (shown in diagram 2 below)
  • Dual in-wheel motors

Advantages of the split layout include the ability to power all four wheels simultaneously, to reduce packaging complexity, and to use a larger engine / motor combination. Most hybrid supercars use this layout, usually with the engine driven wheels at the rear.

Diagram 2: Electric motor powered front axle, combustion engine powered rear wheels
Split axle hybrid

A. Petrol or diesel engine
B. Differential,
C. Electric motor (or dual motors in this case)
D. Battery bank

The dual motor technology shown as an example in Diagram 2 is more complex and expensive to produce, and is only likely to be realised in higher performance hybrids or electric vehicles. Some examples of the application of dual high performance electric motors are shown below.

high performance hybrid supercars

A new generation of hybrid supercars are now emerging - a strategy primarily driven by tough new emissions legislation applied both to road cars and in racing. To satisfy the traditional sports car owner, most high-performance hybrids will maintain conventional power at the rear axle to deliver a sporty feel and top speed performance, so the natural use of the electric motor will be to contribute at the front. As the technology has advanced, the idea of hybrid sports cars has become more appealing due to the fact that electric motors have the benefit full torque available immediately. When applied correctly, this can help fill the flat spots in a conventional engine's power curve and improve relative performance. The challenge for manufacturers is to overcome the weight disadvantages associated with the high output battery packs required for these products. Expect to see hybrid systems appearing in many more high-performance cars as the technology improves.

High performance hybrid / electric examples:

Mercedes SLS AMG E-Cell
Mercedes SLS electric drivetrainMercedes E-Cell SLS dual motor electric drivetrain Mercedes SLS E-Cell exterior
Mercedes E-Cell SLS exterior
Mercedes SLS E-Cell powertrain
Mercedes SLS E-Cell powertrain
Porsche 911 GT3 Hybrid
Porsche 911 GT3 electric motors
Porsche 911 GT3 electric motors
Porsche GT3 Hybrid exterior
Porsche GT3 Hybrid exterior
Porsche GT3 Hybrid powertrain
Porsche GT3 Hybrid powertrain
Honda / Acura NSX   Infiniti Emerge
Honda NSX exterior
The Honda NSX has a split axle hybrid powertrain
  Infinity Emerge
The Infiniti Emerge uses split axle hybrid technology

Extended range electric vehicle

[Sometimes know as 'series' or range extended hybrid cars]

Engine assisted hybrids vehicles use an electric motor as the sole source of drive, so these are essentially electric vehicles. However they address the range constraints of a typical electric car by using a more conventional combustion engine when required to recharge the batteries and extend the life of the batteries. The engine is never used to directly power the wheels, and this means it can operate in the most efficient conditions to maximise economy.

Diagram 3: Range extended electric vehicle
Range extender hybrid

A. Electric motor as the primary source of propulsion
B. Differential
. Engine / generator
D. Battery bank

  • There are many dealerships, such as Toyota Ft. Worth that offer a range of hybrid vehicles, with experts to find the best vehicle to suit your wants and needs.

Range extender hybrid examples:

Chevy Volt/Vauxhall Ampera Volvo Hybrid  
Chevy Volt
Chevrolet's range extender hybrid
Volvo range extender hybrid
Volvo range extender hybrid

Regenerative braking

Regenerative braking is an energy recycling method used on most hybrid and electric cars. The idea is to convert the kinetic energy (which is usually lost as heat during braking) into usable electricity to recharge the battery pack. Energy is usually captured by using the main electric motor in reverse (as a generator), which is connected to the wheels automatically when braking is started. The Porsche GT3 hybrid uses a high speed flywheel to store captured braking energy, when is then released on demand to power the motors.

hybrid Glossary

  • EREV - Extended Range Electric Vehicle
  • Full hybrid - the ability to run on either the engine, the electric motor, or a combination of the two
  • Mild hybrid - a car which cannot be powered by the electric motor alone
  • Parallel hybrid - both the engine an motor are connected to the transmission which powers the wheels
  • PHEV - Plug-in hybrid electric vehicle (can be charged by plugging-in)
  • Series hybrid - only the electric motor can drive the wheels, the engine simply charges the batteries

Related articles

Driving for economy Electric car Why biofuel is a bad idea
Get there dry!

Website of the month:


Especially useful for motorcyclists and road trippers - plan your route, get a weather forecast at various points, then adjust your departure time to avoid the rain - genius!

Click here to visit